Using a computer based oscilloscope was never easier than with
the WiFiScope WS4 DIFF: simply switch it on and start the
software on the computer:
• no power cables required as it is battery powered and can operate hours on a fully charged battery
• no interface cables required as it uses WiFi to connect to the computer
This allows you to measure fully floating, fully isolated from your computer. The WiFiScope WS4 DIFF can be
placed near any test subject that may be hard to reach, or on moving objects, where wired connections are not
possible.
Because the WiFiScope WS4 DIFF is not connected to the computer, there is no risk of damaging the computer.
When measuring in remote locations where a wired network is
available, the WiFiScope WS4 DIFF can also be used through its LAN
port. Measurements can then be performed from any location via
the network, without having the computer to be close to the test
subject.
Using its 1 Gbit LAN connection, the WiFiScope WS4 DIFF can achieve
higher streaming performance than via WiFi.
When wireless measuring or LAN connected measuring is not
required or not possible, the WiFiScope WS4 DIFF can also be
connected via its USB port. This gives the benefit of even higher
streaming performance.
The WiFiScope WS4 DIFF is a 4 channel differential USB oscilloscope with a maximum sampling speed of 50MSa/s
and 128 kpoints memory per channel. The differential input channels enable safely measuring, without risk of
creating a short circuit through the oscilloscope. The WiFiScope WS4 DIFF is delivered with a complete
measurement software package that offers all you need for your measurement applications
</div
Besides measuring in block mode, the WiFiScope WS4 DIFF is also capable of performing continuous streaming
measurements. This will create a continuous uninterrupted data stream to the computer. The data can then be
displayed on the screen and/or saved to disk.
Versatile multi channel oscilloscope software
The WiFiScope WS4 DIFF is delivered with the versatile multi channel oscilloscope software, which transforms the
WiFiScope WS4 DIFF into an oscilloscope, spectrum analyzer, data logger, multimeter and protocol analyzer.
Some of the powerful features of the multi channel oscilloscope software are indicated below, for a full description of
the multi channel oscilloscope software, refer to the multi channel oscilloscope software page
| Item | Description |
|---|---|
| Carry case | Carry case BB453 |
| Instrument | WiFiScope WS4 DiFF |
| Measure leads | 4 x Measure lead TP-C812B, Differential BNC -> 4 mm banana plug |
| Attenuator | 4 x Differential attenuator TP-DA10 |
| Accessories | Ground compensation Cable TP-GCC150 Handyscope / WiFiScope power supply USB3 cable, 1.5 m long Network cable, 3 m long Probe compensation cable TP-DB9-BNC-30 (only with option SafeGround) |
| Software | For Windows 10, via website |
| Drivers | For Windows 10, via website |
| Software Development Kit | For Windows 10 and Linux, via website |
| Manuals | Instrument manual and software user’s manuals color printed and digital, via website |
94, Electronic Complex, Pardesipura, Indore-452010, Madhya Pradesh, India.
©2024.All Rights Reserved.
