WiFiScope Connection possibilities:

WIFi connected

Using a computer based oscilloscope was never easier than with
the WiFiScope WS5: simply switch it on and start the software on
the computer:
• no power cables required as it is battery powered and can
operate hours on a fully charged battery
• no interface cables required as it uses WiFi to connect to the computer
This allows you to to measure fully floating, fully isolated from your computer. The WiFiScope WS5 can be placed
near any test subject that may be hard to reach, or on moving objects, where wired connections are not possible.
Because the WiFiScope WS5 is not connected to the computer, there is no risk of damaging the computer.

LAN connected

When measuring in remote locations where a wired network is
available, the WiFiScope WS5 can also be used through its LAN port.
Measurements can then be performed from any location via the
network, without having the computer to be close to the test subject.
Using its 1 Gbit LAN connection, the WiFiScope WS5 can achieve
higher streaming performance than via WiFi

USB connected

When wireless measuring or LAN connected measuring is not
required or not possible, the WiFiScope WS5 can also be connected
via its USB3 port. This gives the benefit of even higher streaming
performance. Additionally, when connected via USB, the WiFiScope
WS5 can be combined with oscilloscopes via its CMI interface

Hardware features

This powerful high speed WiFi oscilloscope combines fast sampling up to 500 MSa/s with high resolutions of 12, 14
and 16 bit, a large memory of 64 MSamples and an extremely accurate built-in 40 MHz 14 bit Constant Data Size
(CDS) arbitrary waveform generator with 24 V peak to peak output, generating true form signals. The oscilloscope
supports continuous streaming measurements up to 20 MSa/s and can be synchronized with other oscilloscopes
using the CMI interface to form a multi channel combined instrument with synchronized time base. The CMI
interface is available by default on the WiFiScope WS5. Optionally, the WiFiScope WS5 can be delivered with
SureConnect connection test and resistance measurement on each channel.
The flexibility and quality that the WiFiScope WS5 offers is unparalleled by any other oscilloscope and function
generator in its class

Software features

Versatile multi channel oscilloscope software
The WiFiScope WS5 is delivered with the versatile multi channel oscilloscope software, which transforms the
WiFiScope WS5 into an oscilloscope, spectrum analyzer, data logger, multimeter and protocol analyzer.
Some of the powerful features of the multi channel oscilloscope software are indicated below, for a full description of
the multi channel oscilloscope software, refer to the multi channel oscilloscope software pages.

Package Contents