WiFiScope Connection possibilities:

WIFi connected

Using a computer based oscilloscope was never easier than with
the WiFiScope WS6 DIFF: simply switch it on and start the
software on the computer:
• no power cables required as it is battery powered and can operate hours on a fully charged battery
• no interface cables required as it uses WiFi to connect to the computer
This allows you to measure fully floating, fully isolated from your computer. The WiFiScope WS6 DIFF can be
placed near any test subject that may be hard to reach, or on moving objects, where wired connections are not
possible.
Because the WiFiScope WS6 DIFF is not connected to the computer, there is no risk of damaging the computer.

LAN connected

When measuring in remote locations where a wired network is
available, the WiFiScope WS6 DIFF can also be used through its LAN
port. Measurements can then be performed from any location via
the network, without having the computer to be close to the test
subject.
Using its 1 Gbit LAN connection, the WiFiScope WS6 DIFF can achieve
higher streaming performance than via WiFi.

USB connected

When wireless measuring or LAN connected measuring is not
required or not possible, the WiFiScope WS6 DIFF can also be
connected via its USB3 port. This gives the benefit of even higher
streaming performance. Additionally, when connected via USB, the
WiFiScope WS6 DIFF can be combined with oscilloscopes via its CMI
interface

Hardware features

This powerful high speed WiFi oscilloscope combines fast sampling up to 1 GSa/s with high resolutions of 12, 14 and
16 bit and a large memory of 64 MSamples on all four channels. The oscilloscope supports continuous streaming
measurements up to 200 MSa/s and can be synchronized with other oscilloscopes using the CMI interface to form a
multi channel combined instrument with synchronized time base. The CMI interface is available by default on the
WiFiScope WS6 DIFF. Optionally, the WiFiScope WS6 DIFF can be delivered with SureConnect connection test and
resistance measurement on each channel. Also, the WiFiScope WS6 DIFF can be delivered with SafeGround option.
With SafeGround you can switch the differential inputs of the WiFiScope WS6 DIFF into single ended inputs with
ground protection. It allows to make measurements using standard attenuating probes and protects the scope when
a short circuit to ground is created.
The flexibility and quality that the WiFiScope WS6 DIFF offers is unparalleled by any other oscilloscope in its class

Software features

Versatile multi channel oscilloscope software
The WiFiScope WS6 DIFF is delivered with the versatile multi channel oscilloscope software, which transforms the
WiFiScope WS6 DIFF into an oscilloscope, spectrum analyzer, data logger, multimeter and protocol analyzer.
Some of the powerful features of the multi channel oscilloscope software are indicated below, for a full description of
the multi channel oscilloscope software, refer to the multi channel oscilloscope software pages

Package Contents