Low ripple noise: <350uVrms / 2mVpp

With a transient response capability of less than 50us, the DP2000 is able to cope with changing loads and protect your tests.

Fast transient response time: < 50u

Optical CCD Align system (camera) Significantly faster and more accurate than the front and back system. Virtually indispensible in structuring multilayer boards and double-sided PCBs. Includes automatic tool length inspection and automatic board surface detecting.

High Speed Arb Mode

Emulate dynamic power signals for reliability and robustness testing Emulate dynamic power signals for reliability and robustness testing With high-speed arbitrary mode, engineers can create a function or waveform of up to 512 points with a minimum dwell time as low as 1 millisecond. Create sine waves, pulses, ramps, or custom shapes to output on the power supply channel in either voltage or current. Set up the waveform to repeat or trigger using the digital IO or bus communication. Combine high speed arb mode and sampling for complete analysis of a test device’s power performance.

Automatic Series & Parallel Connections

Simplified wiring and connections for fast and easy setup Simplified wiring and connections for fast and easy setup Channels 1 & 2 can be internally connected via the utility menu either in parallel or series. This allows engineers to get voltage or current from both channels with only a connection to the channel 1 terminals. With all 3 fully isolated channels it is easy to configure the instrument for your application.